February 2009 - Posts

Rotational Molding
25 February 09 01:48 PM | jessica.schiffman | 0 Comments   

team members: Cale Buxton Derrick Smith Christopher Stanislawczyk Read More...

Attachment(s): Rotational_Moulding.ppt

Homework 3 and 4 2009
25 February 09 11:33 AM | Caroline Schauer | 0 Comments   

Since I am getting this to you late, I combined the two homeworks into 1 which is due Fri the 6th. Caroline Schauer Read More...

Attachment(s): Homework 3 and 4 2009.doc

Extrusion lab
24 February 09 03:06 PM | jessica.schiffman | 0 Comments   

There will be no lab class tomorrow. The extrusion lab has been postponed to March 11th. Class will still meet tomorrow in the MSE conference room at noon. Read More...

Compression Molding
23 February 09 12:53 PM | jessica.schiffman | 0 Comments   

Members Jesse McGrath Sherif Madkour Jonathan Chodosh Read More...

Attachment(s): compression molding.ppt

Cast Film Extrusion
23 February 09 12:36 PM | jessica.schiffman | 0 Comments   

Andrew Leithead Chris Barr Nick Antonakos Read More...

Attachment(s): Flat Film Processing.ppt

Calendering
20 February 09 12:52 PM | jessica.schiffman | 0 Comments   

Mike Coster James Coffey Carly Snyder Read More...

Attachment(s): Calendering presentation.ppt

Tubular Film Blowing
20 February 09 12:26 PM | jessica.schiffman | 0 Comments   

Tubular Film Blowing Presentation Read More...

Attachment(s): The Tubular Film Blowing Process.ppt.ppt

Blow Molding
18 February 09 03:06 PM | jessica.schiffman | 0 Comments   

Garrett Pritchyk Michael Scesa Bryant Richardson Read More...

Attachment(s): BLOW MOLDING FINAL Compatible.ppt

Thermoforming Presentation - Winter '09
18 February 09 02:33 PM | jessica.schiffman | 0 Comments   

See attached presentation. Read More...

Attachment(s): PolyProc Thermoforming Presentation Rev1.ppt

viscosity lab write-up (2)
11 February 09 10:31 AM | jessica.schiffman | 0 Comments   

Please assume that both the PEO and alginate plots are linear. Read More...

Viscosity lab write-up
09 February 09 02:37 PM | jessica.schiffman | 0 Comments   

The entire lab should be at least two and no more than three pages long. Make sure that you have section headings in your lab report such as: experimental, results, and conclusion. These headings can be bold faced and placed on the same line as other Read More...