|
|
Classes (Fall 2011)
-
|
Last Name First Name Group # Mass (g) Load (kg) Load: Mass Ratio (kg/g) Team Ranking Schroeder Danielle 1 2.92 11.2 3.84 Brudner Alexander 1 5.27 51.3 9.73 Diazelcastillo Daniel 1 Bromhead Christopher 1 Rosa Stephany 1 Desai Ayan 2 1.92 7.4 3.85 Malm...
|
-
|
For a complete listing of MSE faculty contact information, please visit the Materials Science & Engineering Faculty page . Last Name First Name Group # Project Selection MSE Advisor Schroeder Danielle 1 Composites for a Buck Barsoum Brudner Alexander...
|
-
|
Dear class, attached is the data from the XPS lab. Good luck with the last report! Keep on shining!, Ioannis...
|
-
-
-
-
|
Dear class, find the !updated! XPS slides attached. Ioannis...
|
-
-
-
|
Raman for group 3 is attached....
|
-
-
|
Group 2 actually had a diamond.. Ladies.. you gotta give your boyfriends a harder time! They definitely gotta get you one for x-mas - just apply some pressure!...
|
-
|
Dear class, attached is the FTIR data for all groups. Raman data will be for each group individually. Ioannis...
|
-
-
-
|
Reading material for Ch. 7....
|
-
-
|
Dear class, find the slides for the SEM/TEM class attached. Ioannis...
|
-
|
Hi class, attached to this post you will find the data from the indentation lab. Make sure to include the following in your lab report: 1.) Calculate the Vickers hardness of the shown indent. The sample is an epoxy polymer. 2.) Plot all load-displacement...
|
-
-
|
Dear class, find the handouts attached. Ioannis...
|
-
-
|
Dear class, find attached the lecture on thermal analysis. Ioannis...
|
-
|
Dear class, find the files for the TEM lab reports attached. Also make sure to address the following: 1. Estimate the average inner diameter of the shown carbon nanotube. What is the thickness of the nanotube wall? 2. Estimate the d-spacing for the shown...
|
-
|
|
|